Air Cooled Heat Pump

ANLI

•Version with built-in hydronic kit inverter
• High efficiency even at part load
• Production of hot domestic water

Click here for the pdf

ANL H 021-203

Reversible air/water heat pump for air conditioning systems with cold water production for cooling rooms and hot water for heating and/or domestic hot water services, suitable for connection with small or medium users. Equipped with scroll compressors, axial fans, external coil with aluminium fins, plate heat exchanger on the side. The base the structure and the panels are made of steel treated with polyester paint RAL 9003.

Click here for the pdf

NRK 0200-0700

•Water produced up to +65 °C •Heating operations with external temperatures down to -20 °C • Optimized for operation in heating mode • Night mode

Click here for the pdf

NRL 0800H-1800H

• High efficiencies also at partial loads • Fast and easy installation • Night mode

Click here for the pdf

Air Handling Unit

NCD

• 24 sizes of central air handling units with double panelling with panel thickness of 50 mm • Support structure realised in aluminium alloy sections and a large choice of panels. • Wide range of sections and components to satisfy all plant engineering requirements • Double intake centrifugal fans with forward or reverse blades. • PLUG FAN type fan with Inverter regulation, able to adapt to the most varied system requirements

Click here for the pdf

TS

•Very quiet • Available units with heat exchanger with 3-4-6 rows • Ductable units

Click here for the pdf

ENERGY

The units of the Energy series represent the maximum expression of technical innovation for the treatment of outside air. The Energy series has been specifically designed to reduce to the minimum the operating energy consumption, which represents around 80% of the entire life cycle cost of an air treatment unit. The double heat recovery system (static and active) and the innovative cooling and adiabatic humidification system, allow the supply of air at the desired conditions with the minimum energy expenditure.

Click here for the pdf

SPL 025-130

The units from the SPL series represent the ideal solution to guarantee the comfort conditions in small-medium spaces such as health centres, spa areas, fitness centres, small swimming pools, sports facilities, etc. The unit contains a refrigerant circuit and a system for the recovery of sensible and latent heat coming from the humid air extracted from the space, thereby being optimised for the reduction of energy consumption. The main function of the unit, which is a "plug and play" machine ready for use, is that of dehumidifying and at the same time ensuring control of the temperature and humidity conditions of the area served.

Click here for the pdf

Chiller

Air Cooled

Air Water Chiller Condensing Unit

• COMPACT VERSION • HIGH EFFICIENCIES ALSO AT PARTIAL LOADS • EASY AND FAST INSTALLATION

• Standard version • Low noise version • Option integrated hydronic kit user side

Air Water Chiller Series

Standard version • Low noise version • Option integrated hydronic kit user side

NRB 0282-0754 • High seasonal efficiency • Night mode • Reduced amount of ref side

NRL 0280/0750 cooling only Air/Water Chillers for external installation Scroll compressors, plate heat exchangers and axial fans Cooling capacity 52,8÷194,6 kW

NRV 0550 cooling only • Easy and quick to install compact • Reliability and modularity • Microchannel coils

NSM 1402/9603 cooling only • HIGH EFFICIENCY ALSO AT PARTIAL LOADS • MICROCHANNEL COIL • HP FLOATING: ESEER +5% WITH INVERTER FANS • NIGHT MODE

NSMI 1251-6102 Microchannel coils • Night mode • Operation up to 50 °C outdoor air • Low electrical consumption

Free Cooling Chiller

Air Cooled Free Cooling Chiller

NRB 0800-3600 • Microchannel coils • Night mode • Operation up to 50 °C outdoor air • High efficiency also at partial loads

NRL 0280-0750 F 0800-3600 • High efficiency also at partial loads • Compact dimensions

NRV 0550 F • Micro-channel coil • Easy and quick to install compact module • Reliability and modularity

NSM 1402-9603 F • Microchannel coils • Night mode • Operation up to 50 °C outdoor air • High efficiency also at partial loads

NSMI 1251-6102 F • High efficiency also at partial loads • Microchannel coils • Low electrical consumption

R410A • HIGH EFFICIENCY VERSION • HIGH EFFICIENCY ALSO AT PARTIAL LOADS • SYSTEM SIDE INTEGRATED HYDRONIC KIT OPTION

TBA 1300-3350 F •High efficiency also at partial loads • Microchannel coils • Low peak current (only 6 Amps!) • Evaporator with low refrigerant charge • Available also R513A (XP10) refrigerant gas

Water Cooled Chiller

WMX-WMG • High efficiency also at partial loads ESEER 8,4 • Design compact • Extremely reliable and flexible

Click here for the pdf

TW110 • Compact dimensions • Extraordinary efficiency at part load

Click here for the pdf

WTX • High efficiency up to 9 • Extended operating range • Possibility of selecting between heat exchangers with 1 or 2 passes on water side

Click here for the pdf

Fan Coil Unit

FCZ • Extremely silent operation • Advanced controller allowing programming via smart devices • Dualjet version for highest four-season comfort

Click here for the pdf

MZC • multi-zone plenum for controlling air capacity • available for CHANNELLED On/off and inverter fan coils

Click here for the pdf

Control panels • wide range of control panels for an easy and complete control of all functions of the fan coil

Click here for the pdf

FCZ H GERMICIDAL LAMP INCORPORATED • IDEAL FOR PLACES WHERE PERFECT HYGIENE IS REQUIRED • 3-ROW COIL

Click here for the pdf

Precession Air Conditioning Unit

G 070-932 • Increase TA the front section of the coil by about 40-50% thereby reducing its air-side pressure drops and consequently the power consumption of the fans. • Increase ATA the dimension of the air filters installed up-line of the cold coil, that brings about a reduction of pressure drops and less maintenance. • Increase ATA the efficiency of the fans installed in the sub-base expel treated air horizontally.

Click here for the pdf

R 40-361 • Exploit the empty spaces left by the racks to ensure better cooling for the server. • Rear intake from warm corridor • Front delivery towards cold corridor with horizontal flow; this reduces internal pressure drops, with consequent reduction of the power absorbed by the fans. • Easy front and read access for simplified maintenance. • Cooling, hydraulic and electrical connections from top or bottom.

Click here for the pdf

P 10-932 • Strict control of room temperature and humidity. • A high ratio of cooling power and footprint, which facilitates the design of the rooms to be airconditioned. • High energy efficiency values, resulting in lower CO2 emissions in the environment and in particularly low operating costs.

Click here for the pdf

Water Cooled Heat Pump

Heat Pump With Reversable Refrigerent Side

NXW 0503H - 1654H • Installation versatility also for geothermal applications. • Options of 1 or 2 pumps on both source and user side. • Production of hot water up to 55 °C

Click here for the pdf

WRK •Optimised for heating in centralised systems. • Production of hot water at high temperature up to 68°C. • Independent from the gas network. • DHW production.

Click here for the pdf

WRL 026H - 161H • High efficiency • Production of hot water up to 60 °C • Production of domestic hot water priority • Suitable for geothermal applications

Click here for the pdf

WSH • Refrigerant reversing valve • Optional electronic expansion valve which allows: Cooling down to -6 °C Modulating capacity control 25-100%

Click here for the pdf

Heat pump With Reversable Water Side

HWSG • Use of the new ecological gas R1234ze • Unit optimised for high condenser temperatures. • Production of hot water from condenser up to 65° C.

Click here for the pdf

NXW 0503 - 1654 • Installation versatility also for geothermal applications. • Options of 1 or 2 pumps on both source and user side. • Reversible on hydraulic side in heat pump

Click here for the pdf

WF Optimised for low condenser temperatures For example: units working in cooling mode with ground or tower water, or units working in heat pump mode with low leaving water temperature • Maximum condenser leaving water temperature: 50°C • Standard electronic expansion valve

Click here for the pdf

WRL 026 ÷ 161 • High efficiency • Suitable for geothermal applications

Click here for the pdf

WS 0601 - 2802 • High efficiency all in Class A Eurovent • Optimised for low condenser temperatures • Optimised for geothermal applications • Available also R513A (XP10) refrigerant gas

Click here for the pdf

HWF • Optimised for high condenser temperatures for example: units operating in heating mode • Maximum condenser leaving water temperature: 60°C • Standard electronic expansion valve which allows

Click here for the pdf

Fire Damper

BSK Fire-resisting damper

• A fire safety damper prevents the spread of smoke and fire via ventilation and air conditioning system ducts in the event of fire. • Such units are installed in air ducts located in fire-separation walls and ceilings. The fire resistance rating according to EN 1366-2 is EIS 60 or EIS 120

RSKE / RSKM Multi-purpose fire safety smoke dampers

• The dampers are intended for integration into smoke control systems of buildings and structures of various purpose and designed for extraction of combustion products from the spaces of floor corridors, hallways, air locks etc. •The dampers can be used as smoke dampers in emergency smoke exhaust ventilation systems in the event of a fire to support evacuation of people from the building at the initial phase of the fire occurring in any of the building spaces. •The RSKE/RSKM multi-purpose fire safety smoke dampers are rated to resist fire for 180 minutes (E 180) at the temperature of 600 °C.

Heat Recovary Unit for Single Room Ventilation

VENTO EXPERT A30 S10 W V.2

•Arrangement of efficient energy-saving supply and exhaust single-room ventiʼní³Ó̳Ìĕ‰íæϚ°Óòæ æϚÓí퉫 æϚæÓ³‰Å‰Ìœ commercial premises. •Reducing heat losses caused by ventilation due to heat recovery. •Humidity balance and regulated air exchange create individually controlled microclimate. •t³Є%³ ÓËËò̳‰í³ÓÌ • íþ Ì æ ý â‰Å single-room ventilation units for coordinated operation. •Controlled by Android or iOS smartphone or tablet

CIVIC EC DB

•The CIVIC EC DB units are designed for singleroom ventilation of schools, offices and other public and commercial premises. Offer the ideal simple and efficient ventilation solutions for existing and renovated buildings and require no layout of air ducts. •Efficient supply and extract ventilation for separate premises. •EC motors with low energy consumption. •Low-noise operation. •Simple mounting

FRESHBOX 100 WIFI

•Efficient solution for supply and exhaust ventilation of enclosed spaces. •Electric preheater or reheater modification available for cold climate conditions. •Heat exchanger with an enthalpy membrane modification available for humid and hot climate conditions. Low-energy EC motors. •Silent operation. •Supply air purification ensured by two built-in G4 and F8 filters (optionally H13 filter, F8 Carbon). •Upgradeable with an exhaust duct to provide air extraction from the bathroom. •Easy installation. •Compact size. •Wi-Fi communication •Controlled by Android or iOS smartphone or tablet over Wi-Fi.

Industrial Fan

Axial Fan

Axis-F Axial inline fans.
•Supply and extract ventilation systems installed in various premises. •Ideal solution for boosting large air volumes at low aerodynamic resistance in the ventilation system.

Axis-FP Axial smoke extraction fan

•The fans are used for extraction of smoke in case of fire and removal of hot air outside. The fans are also used for general ventilation systems. •The fans are rated for permanent operation at ambient air temperatures from -60 °C up to +50 °C (depends on climatic category, see the Designation key). The fans are able to operate 2 hours at the temperatures +200 °C, +300 °C and +400 °C..

Axis-Q

•Supply and extract ventilation systems installed in various premises. •Ideal solution for boosting large air volumes at low aerodynamic resistance in the ventilation system. •Refrigerating technologies for cooling of compressor condensing units. •Direct air extract. •For positive pressure ventilation in firefighting systems.

Primo Inline mixed flow fans with AC and EC motors

•Inline fans for supply and exhaust ventilation of various commercial and industrial premises requiring powerful air flow. •The fans are compatible with ∅ 355 and 400 mm air ducts. •Combines wide capabilities and high performance features of axial and centrifugal fans, providing powerful air flow

Turbo Inline mixed-flow fans

•Supply and extract ventilation systems installed in various premises. •Mounting in kitchens, bathrooms and other humid premises. •Ventilation air ducts requiring high pressure, powerful air flow and low noise level. •Compatible with Ø 100 up to 315 mm round air ducts.

Axis-P Medium pressure axial fans

The fans are used: •as a part of a smoke extraction system for air pressurization to create a positive air pressure differential in stairway enclosures, airlock vestibules and lift shafts, to prevent spreading of smoke in premises, protect people using evacuation routes from fire hazards and enable conditions for fire-extinguishing measures. •in general ventilation systems in industrial, administrative and residential buildings

centrifugal Fan

Helix

‰Supply and exhaust ventilation systems installed in various premises. ‰Suitable for use as ventilation or air conditioning system components. ‰Compatible with round and rectangular air ducts.

Centrifugal fans S-Vent

„ Use ‰ Exhaust ventilation systems installed in various premises. ‰ Suitable for use as a component of an assembled air handling or conditioning unit. ‰ Compatible with Ø 140 up to 500 mm round air ducts or 125x125 up to 800x800 mm rectangular air ducts.

Extero Exhaust centrifugal fans

‰Extract ventilation systems installed in various premises. ‰External wall mounting from outside. ‰Compatible with Ø100 up to 200 mm round air ducts.

Inline centrifugal fan Box Type

The unit is designed for indoor application with the ambient temperature ranging from 0 °C up +45 °C and relative humidity up to 80 %. The unit is rated as a Class I electrical appliance. Hazardous parts access and water ingress protection rating: IP22 for the assembled unit connected to the air ducts and IP44 for the unit motors. The unit design is constantly being improved, thus some models may be slightly different from those described in this manual.

Centro (V2) Inline centrifugal fans

‰Supply and extract ventilation systems installed in various premises. ‰Mounting in kitchens, bathrooms and other humid premises. ‰Compatible with Ø 100 up to 315 mm round air ducts.

Tower-V EC Roof centrifugal fans with EC motor

‰Supply and exhaust ventilation systems installed in various premises. ‰Suitable for use as ventilation or air conditioning system components. ‰Compatible with round and rectangular air ducts.

Tower-SV / Tower-SH Roof-mounted centrifugal smoke exhaust fans

‰Smoke exhaust fans are used in emergency exhaust ventilation systems for forced extraction of smoke and heated gases and simultaneous transfer of heat away and beyond the limits of the serviced spaces in case of fire. ‰Such units are used in production, public, residential, administrative and other spaces.

Iso-Mix Sound-insulated inline mixed-flow fans

‰Supply and extract ventilation systems installed in various premises with high requirements to the noise level. ‰For ventilation air ducts requiring high pressure, powerful air flow and low noise level. ‰Compatible with Ø100 up to Ø 315 mm air ducts.

Underground Ventilation

IMPULSE CENTRIFUGAL FANS

Centro-Jet casing is made of polymer coated steel. Due to low height of the casing the fan is recommended for use in low-ceilinged room. The protecting grille on the intake side prevents ingress of foreign objects into the fan. Deflector plates on the exhaust side of the fan ensure correct air flow distribution.

JET AXIAL FANS

Axis-Jet casing has a tubular shape and is made of polymer coated steel. The fan has a sound insulation of mineral wool. The casing includes inner brackets for motor fixation. These brackets act as directing vanes and distribute air flow uniformly, thus increasing aerodynamic performances of the fan.

Air & Dirt Separator

DISCAL ® deaerator-dirt separator DISCAL 546 - 5461 series

Deaerators-dirt separators are used to continuously eliminate the air and dirt contained in the hydraulic circuits of heating and cooling systems. They are capable of automatically removing all the air present in the system down to micro-bubble level. At the same time they separate dirt and impurities contained in the water within the circuit and collect them in the lower part of the valve body, from which they may be expelled

Air Vent

Automatic air vents MINICAL® – VALCAL® 5020 - 5021 - 5022 series

Automatic air vents perform the function of eliminating the air which builds up inside climate control system circuits without any manual intervention. This prevents the appearance of negative phenomena that might prejudice the working life and performance of the heating system, such as: - corrosion caused by oxygen; - localised air pockets in the radiators; - cavitation in the circulation pumps.

Balancing Valve

130 series

Balancing valves are hydraulic devices used for accurately regulating the flow rate of the thermal medium supplying the terminal emitters of a system. Correct balancing of the hydraulic circuits is essential to guarantee system operation according to design specifications, high thermal comfort and low energy consumption.

Ball valve with check valave

Ball valves with built-in check valve 3230 - 332 - 333 - 334 - 327 series

The ball valves with built-in check valve BALLSTOP combine two devices in a single body: a ball shut-off valve and a check valve housed inside the ball itself. This dual function allows for quicker installation and a more compact device, which means less space required on the pipe. BALLSTOP valves are available in two versions for two different uses: the version with black plastic external ring for use in domestic water systems and the version with red external ring for heating systems.

HVAC Terminls

Connection and adjustment group for HVAC terminal units

The pre-assembled group for terminal units is compact and able to shut-off, adjust and filter the secondary circuit of the terminal unit. Moreover, it allows for carrying out the system maintenance and calibration operations. It allows the connection of fan coils, cold beams or ceiling conditioning systems with the main distribution network. Complete with insulation suitable for both heating and cooling. Available with Venturi device for flow rate measurement

Mixing Valve

Anti-scale adjustable thermostatic mixing valves

The thermostatic mixing valve is used in systems that produce domestic hot water. It is designed to maintain the preset temperature of the mixed water delivered to the user outlet, when there are variations in the temperature and pressure of the hot and cold water at the inlet, or in the drawn-off flow rate. These devices are also available with fittings complete with strainers and check valves on the hot and cold water inlets.

PCIV

PICV Flowmatic

Pressure independent control valve (PICV) FLOWMATIC®. The pressure independent control valve is a device composed of an automatic flow rate regulator and a control valve with actuator. The device can adjust flow rate and keep it constant in the presence of changing differential pressure conditions of the circuit in which it is installed

PICV Flung Type

Pressure independent control valve (PICV). 146 series

PRV

Pre-adjustable pressure reducing valves with self-contained cartridge

Pressure reducing valves are devices which, when installed on private water systems, reduce and stabilise the pressure of the water entering from the public network. This inlet pressure, in general, is too high and variable to be applied directly to domestic systems. This series of pressure reducing valves have the feature to be preadjustable. The pressure reducing valve can be set to the desired pressure value before installation, using an adjustment knob with a pressure setting indicator. After installation, the system pressure will automatically adjust itself to the set value